Table of Contents
Advertisement
Flush Channel with Diffuser Installation Guide
Read and Save these Instructions before beginning to install Node Flush Channel with Diffuser:
Warning!
To reduce the risk of fire, electric shock, or injury to persons, observe the following:
Read and save these instructions before beginning to install the Node Flush Channel with Diffuser.
When cutting or drilling into wall or ceiling do not damage electrical wiring and other hidden utilities.
•
Warning!
To reduce the risk of fire, electric shock, or injury to persons, observe the following:
Use this unit only in the manner intended by the manufacturer. If you have any questions, contact the
•
• When cutting or drilling into wall or ceiling do not damage electrical wiring and other hidden utilities
manufacturer info@PARC-celings.com.
• Use this unit only in the manner intended by the manufacturer. If you have any questions, contact the
manufacturer at info@parc-ceilings.com.
Before You Start:
Before You Start
Inspect all product parts for flaws and shipping damage.
Inspect all product parts for flaws and shipping damage.
If anything is discovered to be damaged, contact the shipping company and manufacturer immediately.
If anything is discovered to be damaged, contact the shipping company and manufacturer immediately.
Node Flush Channel with Diffuser Installation Tools Required:
Tools Required
Site Conditions, Storage and Handling
Read this guide before handling the product.
Site Conditions, Storage & Handling:
Read This Guide before handling the product.
• Read the Installation Guide before handling.
Read the Installation guide before handling.
•
• Always wear appropriate hand protection when handling.
Always wear appropriate hand protection when handling.
•
• Only store in clean dry conditions.
Only store in clean dry conditions
•
Do not over stack.
•
• Do not over stack.
Do not stack in a way likely to cause falls.
•
• Do not stack in a way likely to cause falls.
Poor or rough handling, rolling or dropping of the product on corners or edges may cause damage to the product or
Poor or rough handling, rolling or dropping of the product on corners or edges may cause damage to the product or
cause the product to deteriorate.
cause the product to deteriorate.
Lengths of node should not span between points as any load applied mid-span may cause product damage.
Lengths of Node should not span between points as any load applied mid-span may cause product damage.
Site storage of items should be flat, preferably on a suitable pallet (supporting the entire length of the Node Flush
Site storage of items should be flat, preferably on a suitable pallet (supporting the entire length of the Node Flush
Channel with Diffuser) without additional top loading.
Channel with Diffuser) without additional top loading.
Consideration should be given to the advice of the Site Occupational Health & Safety Representative regarding manual
Consideration should be given to the advice of the Site Occupational Health and Safety Representative regarding
handling. An assessment should be made of any risk and if necessary mechanical lifting equipment should be used
manual handling. An assessment should be made of any risk and if necessary mechanical lifting equipment should be
used.
The storage space must be cleared of debris and, in general, should be enclosed. The Node Flush Channel with Diffuser
should be kept clean, dry and protected from the elements.
Flush Channel with Diffuser Installation Guide
Site conditions should be prepared for installation of the Node Flush Channel with Diffuser. The site should be clean, dry
and clear of other trades working in the ceiling void.
v001 | Flush Channel with Diffuser Installation Guide
Flush Channel with Diffuser
Installation Guide
3
3
Advertisement
Table of Contents
