Other Channel Settings - Panasonic DMR-HS2 Operating Instructions Manual

Other channel settings

1
Press [SET UP] to show the menus.
2
Press [3, 4] to select "Channel" and
press [1].
SET UP
Antenna System
Auto Channel Setting
Channel Caption
Channel
Preset Channel Caption
Set Up
Manual Channel Caption
Disc
Video VCR Plusi CH Setting
Audio
Display SELECT
TV Screen
ENTER
Auto Channel Setting
Check the antenna system. Automatic setting is performed based
on the current antenna system ( page 13).
3
Press [3, 4] to select "Auto Channel
Setting" and press [ENTER].
SET UP
Channel
Set Up
Disc
Video
Audio
Display
TV Screen
If you have not yet set the clock, the "Auto Channel/Clock
Setting" screen appears.
4
Press [ENTER].
Auto setting starts. This takes a few minutes. (To stop auto
channel setting, press [RETURN].) When finished, the Com-
plete screen or time display is shown. Press [ENTER].
Preset Channel Caption
3
Press [3, 4] to select "Preset Chan-
nel Caption" and press [ENTER].
SET UP
Channel
Set Up
Disc
Video
Audio
Display
TV Screen
4
Press [3, 4] to select the caption
and then press [1].
You can choose from the following captions.
ABC, PBS, CBS, CNN, FOX, ESPN, NBC, HBO, A&E, AMC,
FAM, MAX, MTV, SHOW, TBS, USA, TNT, CBC, UPN, CTV,
WB, TSN, DSC, GLOB
≥The screen scrolls a page at a time if you press and hold
[3, 4].
CATV
Proceed with
the steps
described
below.
TAB
RETURN
Auto Channel Setting
Connect antenna cable and if you use a
cable box, tune it to your local PBS CH
then...
Please push the ENTER key.
ENTER
RETURN
Preset Caption
Caption Channel Number
---
GLOB
- - -
ABC
---
PBS
SELECT
---
CBS
ENTER
RETURN
5
Press [3, 4] to select the channel
corresponding to the caption and
then press [2].
≥Channels are not displayed if they do not contain a station
or if captions have been added manually.
≥To delete the channel number, press [CANCEL].
≥Repeat steps 4 and 5 as necessary.
6
Press [ENTER].
The "Channel" screen reappears.
Manual Channel Caption
3
Press [3, 4] to select "Manual Chan-
nel Caption" and press [ENTER].
SET UP
Channel
Set Up
Disc
Video
Audio
Display
TV Screen
4
Press [3, 4] to select the channel
and then press [1].
≥Channels are not displayed if they do not contain a station
or if preset captions have been added.
5
Press [3, 4] to select the first char-
acter and then press [1].
≥You can choose from the following characters:
A–Z, 0–9, -, &, !, /, (space)
≥To delete the caption, press [CANCEL].
≥Repeat step 5 to enter the other characters.
SET UP
Channel
Set Up
Disc
Video
Audio
Display
TV Screen
6
Press [2, 1] to return to the Channel
Number column when you are fin-
ished.
Repeat steps 4, 5, and 6 as necessary.
7
Press [ENTER].
The "Channel" screen reappears.
To return to the previous screen
Press [RETURN].
When you are finished
Press [SET UP].
Manual Caption
Channel Number Caption
----
125
- - - -
1
2
----
SELECT
3 ----
ENTER
RETURN
Manual Caption
Channel Number Caption
6 ----
8 ----
AAAA
10
12
----
SELECT
23 ----
ENTER
RETURN
15
RQT6570