Common Procedures; Entering A Password (Ratings); Digital Audio Output - Panasonic DMR-HS2 Operating Instructions Manual

Changing the unit's settings
Numbered
buttons
CANCEL
3, 4, 2, 1
ENTER
SET UP SET UP

Common procedures

See page 60 for menu and option details.
1
While stopped
Press [SET UP] to show the menus.
SET UP
Auto Channel Setting
Channel Caption
Channel
Preset Channel Caption
Set Up
Manual Channel Caption
Disc
Video VCR Plusi CH Setting
Audio
Display
TV Screen
Tabs Menus
2
Press [3, 4] to select the menu's tab
and press [1].
3
Press [3, 4] to select the menu and
press [ENTER].
4
Press [3, 4] to select the option and
press [ENTER].
The screen now shows the menu again.
≥Some items require different operations. Read the following
explanations.
To return to the previous screen
Press [RETURN].
When you are finished
Press [SET UP].
62
RQT6570
DVD POWER TV
DVD TV
Í Í
VCR Plus+ TV/VIDEO REC MODE REC
1 2 3
CH
4 6
5
VOLUME
7 8 9
CANCEL
0 100
SLOW/SEARCH
HDD DVD
DIRECT NAVIGATOR PLAY LIST
TOP MENU
MENU
ENTER
RETURN
FUNCTIONS
RETURN
PROG/CHECK ADD/DLT DISPLAY TIME SLIP
OPEN/CLOSE STATUS SKIP
SET UP AUDIO INPUT SELECT CM SKIP
ERASE
DUBBING POSITION MEMORY MARKER
Antenna System CATV
Tab SELECT
RETURN
Options

Entering a password (Ratings)

[DVD-V]
The password screen is shown when you select levels 0 to 7.
1. Input a 4-digit password with the numbered buttons.
≥If you enter a wrong number, press [CANCEL] to erase it.
2. Press [ENTER].
≥The lock symbol appears closed to show the rating is locked.
≥Do not forget your password.
3. Press [ENTER] to confirm the 4 digits.
If you insert a DVD-Video that exceeds the ratings limit you set, a
message appears on the television.
Follow the on-screen instructions.

Digital Audio Output

[DVD-V]
Change the settings when you have connected equipment through
this unit's DIGITAL AUDIO OUT terminal ( page 57, [A]).
Select the "Audio" tab and then "Digital Audio Output" by
following "Common procedures" (
Conversion", "Dolby Digital" and "DTS".
PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz.
Select "On" if the equipment you connect cannot process signals
with a sampling frequency of 96 kHz.
≥Select "Off" if you use analog connect irrespective of the type of
equipment.
Off (Factory preset):
Output as 96 kHz. There is no output if the disc has copy protection.
Select "On" in this case.
On:
Converted to 48 kHz for output.
Dolby Digital and DTS
Bitstream (Factory preset for Dolby Digital):
Select if the equipment you connected can decode the signal.
PCM:
Select if the equipment you connected cannot decode Dolby Digital
signal.
Off (Factory preset for DTS):
Select if the equipment you connected cannot decode DTS signal.
IMPORTANT
If the equipment you connected cannot decode the signal, the
setting must be changed to PCM or Off. If not, signals the
equipment cannot process will be output by this unit, causing
high levels of noise which can damage your hearing and the
speakers.
!?
left) to set up "PCM Down
!?