LG PowerTank PMC-1000 User Manual page 9

Sequential Charging
1. C onnect the charger adapter to the USB cable, and plug it into a wall
outlet. Connect the cable to the portable charger's Micro USB input
port (3).
2. Using the USB cable, connect the portable charger's USB output port
(1, Port A) to your mobile device's USB port.
-
Once the portable charger is fully charged, charging of your mobile
device will begin.
-
W hen your mobile device is finished charging, press the LED button
(4) to resume charging the portable charger.
Depending on Portable device, charging process might not stop
even though battery is fully charged (100% charged). In this
case, it will be not switched to charging the portable charger. In
order to change the sequence for charging the portable charger,
please wait for some time(it may different depending on device's
manufacturer.) or disconnect the portable device from portable
charger.
3. W hen your mobile device is finished charging, remove the USB cable
connecting it to the portable charger.
* If simultaneously charging the mobile device and portable charger,
connect the portable charger's USB output port (1, Port B) to your
mobile device's USB port.
, NOTE
• When sequential charging function is operated, charging current will be
limited. Thus, it may take longer to charge.
7