Table of Contents
Advertisement
Special VCR Features
Remote Warning ON/OFF Feature
If Multi-brand feature is used (page 2), and this
feature is set to on, a warning appears
whenever an invalid key is pressed in TV, DSS
or CALE mode.
1
Press ACTION to display menu.
2
Press
to select
VCR
C / A
CLOCK
CH
REPEAT PLAY
: OFF
REMOTE WARNING
: ON
REMOTE WARNING
AUTO SHUT- OFF
: OFF
AUTO VCR/TV
: ON
and press
to set ON
IDIOMA/LANGUE : ENGLISH
VCR' S OUTPUT CH : 3
or OFF.
SELECT :
SET :
• If "OFF," remote
EXIT
: ACT I ON
warning will not appear
if invalid key is pressed.
3
Press ACTION to return to normal screen.
Auto Shut-Off Feature
The power shuts off at a preset time.
1
Press ACTION to display menu.
2
Press
to select
VCR
C / A
CLOCK
CH
REPEAT PLAY
: OFF
AUTO SHUT-OFF.
REMOTE WARNING
: ON
AUTO SHUT- OFF
: OFF
AUTO VCR/TV
: ON
Press
repeatedly to
IDIOMA/LANGUE : ENGLISH
VCR' S OUTPUT CH : 3
change shutoff time as
SELECT :
SET :
shown below.
EXIT
: ACT I ON
3
Press ACTION to return to normal screen.
• The shut-off countdown will not
Note
function during Play or Record.
VCR/TV Selector Feature
The VCR/TV selection can be set to auto or
manual.
1
Press ACTION to display menu.
2
Press
to select
VCR
C / A
CLOCK
CH
REPEAT PLAY
: OFF
AUTO VCR/TV,
REMOTE WARNING
: ON
AUTO SHUT- OFF
: OFF
and press
to set ON
AUTO VCR/TV
: ON
IDIOMA/LANGUE : ENGLISH
or OFF.
VCR' S OUTPUT CH : 3
SELECT :
SET :
EXIT
: ACT I ON
• OFF(Manual): You select "VCR" or "TV"
mode using the VCR/TV
button on the unit or remote.
• ON(Auto):
"VCR" mode is automatically
set when VCR is turned on,
or in Play mode.
3
Press ACTION to return to normal screen.
Note
• For more on VCR/TV selection, see "Record
one station, watch another" and "Select
channels on VCR" sections (see p. 5 of Basic
Operations book).
Tape Position and Tape Status
Feature
To find out the present tape position and amount
of tape remaining.
Tape position is displayed for VHS-C type
Cassettes, tapes under 30 minute long, and
some other tapes, but the position is not
correct.
1
Press TAPE POSITION
to detect current tape position.
• " DETECTING TAPE
DETECTING TAPE POSITION
POSITION" only
appears the first time
a cassette is inserted
and it takes several
seconds for correct
indication to appear.
SP
• The present tape
R 120 M I N.
position indication
and amount of tape
BEG I N
END
remaining (according
to tape speed) is
displayed.
Tape remaining time
display may not be
precise.
2
Press TAPE POSITION
to return to normal screen.
Note
This function cannot display exact amount of
tape remaining for tapes 30 minutes or less, or
for tapes over 120 minutes in length.
Weak Signal Display ON/OFF Feature
When set to "ON," picture is displayed
regardless of signal strength.
1
Press ACTION to display menu.
2
Press
to select
VCR C / A CLOCK
CHANNEL
ANTENNA : CABLE
and display CHANNEL.
AUTO SET
WEAK SIGNAL DISPLAY : OFF
Press
to select
WEAK SIGNAL
DISPLAY, and press
SELECT :
SET :
to set ON or OFF.
EXIT
: ACT I ON
• ON: Picture is displayed even if signal
is very weak but quality may be
poor.
OFF: Screen turns solid blue when signal
is weak or non-existent.
• Selecting ON has no effect on connected
equipment with blue back feature.
3
Press ACTION to return to normal screen.
VCR Lock Feature
When set to ON, all operations except for timer
record and tape eject are prohibited. Useful for
households with small children.
To turn on, hold down
REC on the VCR in Stop
VCR LOCK ACT I VATED
mode with no tape
inserted for 7 sec.
(Please ignore the NO
CASSETTE warning.)
To turn off, repeat above.
VCR LOCK OFF
• VCR Lock cancels in 24 hours if clock is set.
REC
- 10 -
On-Screen Displays (OSD)
On-Screen Displays (OSD)
Function & Channel Displays
When a function button
CH 0 8
is pressed, e.g. PLAY, or
you change channels,
a 5 second display
appears.
VCR Status & Clock Displays
To display or remove
Function Status
overlay at right,
➛ press DISPLAY*.
Rec Time Remaining
(OTR mode only.
See p. 5 of Basic
Operations book.)
Broadcast Audio
Being Received
Warning and Instruction Displays
OSD
If you attempt to set or review a Timer
PLEASE SET CLOCK BY
PRESSING ACTION KEY
Recording and the Clock is not set...
After a Timer Program has been set...
TURN VCR OFF
FOR TIMER RECORDING
If you press REC on the remote
CHECK CASSETTE
control or VCR, and a cassette is
RECORD TAB
inserted with no record tab...
If you press PLAY, FF, REW, or REC
NO CASSETTE
on the remote control or VCR without
a cassette inserted...
TO CANCEL TIMER REC
If you press POWER or STOP during
PRESS POWER THEN
a Timer Recording...
STOP KEY
(visible in VCR mode only)
VIDEO HEADS MAY
NEED CLEANING
PLEASE INSERT HEAD
If head cleaning becomes necessary
CLEANING CASSETTE
while playing back a tape...
OR REFER TO MANUAL
END
:PLAY
If you press a function button other
VCR LOCK ACTIVATED
than STOP/EJECT or POWER while
the VCR is in VCR Lock mode...
REMOTE CONTROL IS SET
If you press an invalid key on the
TO CABLE/DSS MODE
remote while in CABLE/DSS mode...
USE VCR : VCR KEY
REMOTE CONTROL IS SET
If you press an invalid key on the
TO TV MODE
remote while in TV mode...
USE VCR : VCR KEY
*Important: If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
Blank Tape/
No Video Signal Indications
When blank tape is detected during play,
or the current channel has no signal (with
Weak Signal Display feature (p. 10) set to
OFF), the TV screen will turn solid blue.
Current Time
REC
1 2 : 0 0AM
CH 02
0 : 25
-0 : 1 2 : 3 4
STEREO
SP
SAP
MONO
Tape Speed
(See p. 3 of Basic
Operations book.)
These displays will alert you to a missed
operation or provide further instructions.
Caution
Page
See page 6 of
Basic Operations
book
See page 6 of
Basic Operations
book
See page 3 of
Basic Operations
book
See page 5 of
Basic Operations
book
See page 6 of
Basic Operations
book
See page 3 of
Basic Operations
book
See page 10
See pages 2, 10
See pages 2, 10
- 11 -
Channel
Counter
Hide quick links:
Advertisement
Table of Contents
