Advertisement
Advertisement
Table of Contents
Related Manuals for Robus Vantage 3 Series
Summary of Contents for Robus Vantage 3 Series
- Page 1 4 & 6 SECTION CARBON FIBER MONOPODS VANTAGE SERIES 3...
- Page 2 Securing a Camera/Lens or Head Determine which side of the mounting screw you will need to use for your camera, lens or head and follow the instructions from Reversing the Mounting Screw. Attach your camera, lens, or head to the mounting screw, and make sure it’s securely seated and flush with the baseplate.
- Page 3 Extending the Monopod Turn each twist-lock clockwise and extend each leg section to the desired length. Turn the twist-locks counterclockwise to tighten.
- Page 4 Swapping the Feet The monopod comes with a rubber and a spike foot. To swap the feet, unscrew the rubber foot, and screw in the spike. Use one of the included hex keys to tighten or loosen the spike foot.
- Page 5 Wrist Strap and Belt Clip Use the wrist strap to further stabilize and secure the monopod in your hand. The integrated belt clip attaches the monopod to your waist for hands-free transport.
- Page 6 Reversing the Mounting Screw The monopod offers a reversible 3/8-16 and 1/4-20 mounting screw. Loosen the set screw with the included 2 mm hex key. Unscrew the baseplate until you can remove the mounting screw and switch it to the other side. Screw the baseplate back onto the monopod until it’s secure, and tighten the set screw from the top.
- Page 7 Specifications RCM-633 RCM-439 Maximum Load 33 lb. (15 kg) 39 lb. (17. 7 kg) Maximum Height 65 in. (165 cm) 65 in. (165 cm) Folded Length 17. 2 in. (43. 7 cm) 21. 1 in. (53. 6 cm) Leg Sections Weight 1.
- Page 8 To obtain warranty coverage, contact the Robus Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Robus along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’ s own risk and expense.
Need help?
Do you have a question about the Vantage 3 Series and is the answer not in the manual?
Questions and answers