Toshiba RAV-GP1101AT8-E Service Manual page 91

No. Part name
Side cabinet 1. Detachment
3
2. Attachment
Procedure
1) Carry out the operation in 1. of
2) Remove the screws fixing the inverter assembly
and the side cabinet. (ST1T M4 × 10, 3 pcs.)
3) Remove the screws for the side cabinet and the
valve fixing plate. (ST1T M4 × 10, 2 pcs.)
4) Remove screw for the side cabinet and piping
panel (rear). (Hexagonal screw M4 × 10, 2 pcs.)
5) Remove screw for the side cabinet and the
bottom plate. (Hexagonal screw M4 × 10, 1 pc.)
6) Remove screws for the side cabinet, heat
exchanger and the fin guard.
(Hexagonal screw M4 × 10, 5 pcs.)
1) Temporarily suspend the side cabinet on the
inverter assembly using the hook.
2) Mount the removed screws in the opposite
procedure to that during detachment.
above.
– 91 –
Remarks
Discharge port cabinet
Inverter assembly
Valve fixing plate
Hook
Inverter assembly
Valve fixing plate
Side cabinet