Toshiba RAV-GP1101AT8-E Service Manual page 100

No. Part name
PMV coil 1. Detachment
11
2. Attachment
1. Detachment
Fan guard
12
To prevent scratch on the product, carry out
the work on cardboard, cloth, etc.
2. Attachment
Check that all the hooking claws are fixed at
the specified positions.
Procedure
1) Carry out work of item 1 of
2) Turn the coil while pulling upward and then
remove the coil from the PMV main unit.
1) Surely match the positioning projection of
the coil with the concave part of PMV main
unit and then fix it.
1) Carry out works of item 1 of
REQUIREMENT
2) Remove the discharge port cabinet and then
put on it so that the fan guard side directs
downward.
3) Remove the screw for the bell mouth and
fan guard.
(PT2P M3 × 14 and washer, 4 pcs.)
4) Remove the hooking claws (8 positions) of
the fan guard.
1) Push the hooking claws (8 positions) with
hands from the front side to fix the claws.
2) Attach the bell mouth fixed with screws and
washers.
(PT2P M3 × 14 and washer, 4 pcs.)
REQUIREMENT
.
Positioning projection
and 1 of .
Fan guard
– 100 –
Remarks
Concave part PMV main unit
PMV coil
PT2P M3 14 and washer
Discharge
Bell mouth
port cabinet
Hooking claw
Straight line of bell mouth