Program Out Connection (Prog Out); How To Connect The Digital In Terminals; Connecting A Dtv Decoder To Digital In - Panasonic CT-34WX53 Operating Instructions Manual

Cable Connection

Program Out Connection (PROG OUT)

To use the television audio and video with optional equipment, connect the PROG OUT and TO AUDIO AMP connections
on the back of the television.
CONNECTIONS ON BACK OF TV
DIGITAL
DIGITAL IN
ANT1
ANT1
SPLIT SPLIT
OUT OUT
ANT2 ANT2
AUDIO AUDIO
Procedure
1. Connect optional equipment to PROG OUT and TO AUDIO AMP terminals.
2. PROG OUT terminal display is the same as onscreen display.
See optional equipment manual for further instructions for recording and monitoring.

How to connect the DIGITAL IN Terminals

Connecting a Digital Set -Top - Box to DIGITAL IN
When connecting a Digital Set -Top - Box to DIGITAL - IN, be sure not to select "SKIP" from the INPUT LABEL menu.
Failing to do so may result in a distorted display or black out (refer to page 31).
Digital Set-Top-Box
By inputting a High-bandwidth Digital Content Protection ( HDCP ) high-definition picture source to the DIGITAL IN terminal
of this television, high-definition pictures can be displayed on the screen in their digital form. ( This DVI input terminal is
compliant with the EIA-861 standard and is not intended for use with personal computers. )
Note:
The DIGITAL IN terminal can only be used with 1080i, 480p or 480i picture signals. Set the Digital Set -Top -Box DIGITAL OUT
terminal Output setting to 1080i, 480p or 480i. For detailed information, refer to the Digital Set -Top -Box instruction manual. If
you cannot display the picture because your Digital Set -Top -Box does not have a DIGITAL OUT terminal Output setting, use
the component Video Input (or the S Video Input or Video Input). In this case the picture will be displayed as an analog signal.
12
IN
COMPONENT VIDEO INPUT COMPONENT VIDEO INPUT
1 1 2 2
INPUT INPUT
Y Y
1 1 2 2
VIDEO VIDEO P P
B B
P
P
R R
L L
R R
DIGITAL IN cable
(Not supplied)
Audio
3 3
S-VIDEO
PROG
OUT
VIDEO VIDEO
L L
TO AUDIO TO AUDIO
AMP
AMP
R R
( DVI Input terminal )
ANT1
SPLIT
OUT
ANT2
2 × RCA plug
MONITOR
OR
DIGITAL IN terminals
DIGITAL
IN
COMPONENT VIDEO INPUT
1 2
INPUT
Y
1
VIDEO P
B
P
R
L
AUDIO
R
VCR
2 3
S-VIDEO
PROG
OUT
VIDEO
L
TO AUDIO
AMP
R