Optional Equipment Connections; Vcr; Amplifier (To Audio Amp) - Panasonic CT-27G7D Operating Instructions Manual

O E
PTIONAL QUIPMENT

Optional Equipment Connections

VCR Connection
Follow this diagram when connecting your television to a VCR only.
Note: The remote control must be programmed with the supplied codes to operate the VCR.
Amplifier Connection (TO AUDIO AMP)
(CT-20D12D only)
To listen through a separate stereo system, connect an external audio amplifier TO AUDIO AMP outputs on back of
television.
Note: TO AUDIO AMP terminals cannot be connected directly to external speakers.
Audio Adjustments
1. Select SPEAKERS ON located in the onscreen AUDIO menu.
2. Set amplifier volume to minimum.
3. Adjust television volume to desired level.
4. Adjust amplifier volume to match the television.
5. Select SPEAKERS OFF & VARIABLE AUDIO OUT from AUDIO menu.
6. Volume, mute, bass, treble and balance are now controlled through the television.
Select SPEAKERS OFF & FIXED AUDIO OUT to control audio functions through the external amplifier.
6
C
ONNECTIONS
CABLES NOT INCLUDED
PLAY
R
E FF
W
STOP