Installation; Television Location; Optional Cable Connections; Ac Power Supply Cord - Panasonic CT-32HX40 Operating Instructions Manual

I
NSTALLATION

Installation

Television Location

This unit is intended to be used as part of an entertainment center. Consult your dealer for
available options
r
r
r
r
CAUTION:
or table specified by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination to avoid injury from
tip-over. In order to avoid injury to children, never place your television receiver on
a piece of furniture that is capable of being tilted by a child leaning on it, pulling on
it, standing on it, or climbing on it.
CT-36HX40:
CAUTION:
Use with other carts (or stands) is capable of resulting in instability causing possible
injury.
CT-32HX40:
CAUTION:
Use with other carts (or stands) is capable of resulting in instability causing possible
injury.

Optional Cable Connections

Shielded audio and video cables should be used between components. For best results:
r
r
r

AC Power Supply Cord

CAUTION: TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF
PLUG TO WIDE SLOT OF AC OUTLET AND FULLY INSERT. DO NOT
USE A PLUG WITH A RECEPTACLE OR OTHER OUTLET UNLESS THE
BLADE CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER, CRIMPED, BENT
OR PINCHED, PARTICULARLY AT PLUGS, CONVENIENCE RECEPTACLES, AND THE
POINT WHERE THEY EXIT FROM THE APPARATUS.
4
.
Avoid excessive sunlight or bright lights, including reflections.
Keep away from excessive heat or moisture. Inadequate ventilation may cause internal
component failure.
Fluorescent lighting may reduce remote control transmitting range.
Keep away from magnetic equipment, including motors, fans and external speakers.
Use this television receiver only with the cart, stand, tripod, bracket,
This television receiver for use only with PANASONIC TY-36HX40P stand.
This television receiver for use only with PANASONIC TY-32HX40P stand.
Use 75-ohm coaxial shielded cables.
Use appropriate input and output connectors that match your component connectors.
Avoid long cables to minimize interference.
Polarized plug