Picture In Picture (Pip) Operation - Panasonic CT-32HX40 Operating Instructions Manual

Picture in Picture (PIP) Operation

This television includes a two-tuner Picture In Picture (PIP) feature. This allows you to watch
two (2) live broadcasts at the same time with or without an external video source such as a
VCR, cable box, etc.
Basic PIP Operation
Procedure
Press the PIP button on the remote control to display the PIP frame onscreen.
Note:
PIP Operation with a Cable Box
Procedure
r
Note:
Note:
Note:
The audio is from the Main Picture only.
1. Choose channels for the PIP frame by pressing the remote control PIP CHANNEL
up/down buttons.
2. Choose channels for the Main Picture by pressing the remote control CH up/down
buttons or by using the numeric keypad.
The SWAP button switches the PIP and Main
Picture source.
onscreen PIP and Main Picture source status.
To view premium (scrambled) cable channels through your cable box in the Main Picture :
Use this procedure if you want to watch premium cable channels in the Main Picture
while viewing a television program or video in the PIP frame .
1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2. Tune television to Channel 3.
3. Press the PIP button on the remote control to display the PIP frame onscreen.
The audio is from the Main Picture only.
4. Verify the cable box is ON.
5. Choose channels for the Main Picture by tuning the cable box.
6. Choose channels for the PIP frame by pressing the TV button on the remote control
and using the PIP CHANNEL up/down buttons.
Swap is not available when using the cable box to tune channels. If your cable box has
a video output, it can be connected to the television to allow you to use all PIP
functions. See the equipment manual for more information. (Tune the PIP to the video
input connected to the cable box).
P P
ICTURE IN
SWAP Button
Press the RECALL button for
(PIP) O
ICTURE PERATION
11