After Use; Troubleshooting - Backyard Pro Butcher Series Instruction Manual

General Information and Instructions

AFTER USE

Step 1: To detach Meat Tank from Stand. Remove the bolt for non-rotating operation. Take the meat
tank from the stand.
Step 2: Unscrew the axle-adjusting knob clockwise until the paddle disengages, and then remove
the paddles
Step 3: Wash the meat tank and the paddles with warm soapy water, rinse and dry thoroughly.
Step 4: Spray the unit with a food grade silicone spray. This will prevent oxidation and keep the mixer
in like new condition.
WARNING & PRECAUTION
Please operate according to the Operation Instructions.
WARNING: Please assemble and operate carefully.
WARNING: The function of the Meat Mixer is to mix the meat and seasonings. To avoid
possible injury, do not put your hands inside the mixer while unit is in operation, and do not
operate unit without placing the lid on the meat tank!
Use soap and water to hand clean the mixer. Do not put in dishwasher.
TROUBLE-SHOOTING
Problem(s)
The mixer is hard to crank.
The paddle is loose and shakes a little.
Solutions
Meat mixture has become too stiff. Add water to mix.
Bolts to fasten the paddle are not well assembled.
3