Diagram Legend; Specifications; Important Safety Instructions - Makita DML806 Instruction Manual

ENGLISH
1. Battery
2. Battery Release Button
3. Red Indicator

SPECIFICATIONS

Major Features
Voltage
LED
Operating time
Dimensions (with BL1830, without hook)
Weight (without battery)
• Due to our ongoing research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
IMPORTANT SAFETY
INSTRUCTIONS
WARNING:
When using electric tools, basic safety precautions should
always be followed to reduce the risk of fire, electric
shock, and personal injury, including the following:
READ ALL INSTRUCTIONS.
1. Before using battery cartridge, read all instructions
and cautionary markings on (1) battery charger, (2)
battery, and (3) product using battery.
2. Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
3. Use a power source with the voltage specified on the
nameplate of the charger.
4. Do not attempt to use a step-up transformer, an
engine generator or DC power receptacle.
5. Charge the battery cartridge with room temperature at
10°C - 40°C (50°F - 104°F).
Let a hot battery cartridge cool down before charging
it.
6. When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys, nails,
screws, or other small metal objects that can make a
connection from one terminal to another.
4. Switch
5. Main LED (20 pcs.)
Model
Standard battery
cartridge
BL1430B
BL1815N
BL1820B
BL1830/BL1830B
BL1840B
BL1850B
BL1860B

Diagram Legend

Main LED 0.5 W x 20 pcs.
Sub LED 1.0 W x 1 pc.
Main LED (20 pcs.)
when lit
Approx. 4.0 hours
Approx. 3.0 hours
Approx. 4.0 hours
Approx. 6.0 hours
Approx. 8.5 hours
Approx. 11 hours
Approx. 13 hours
L 365 mm x W 78 mm x H 119 mm
Shorting the battery terminals together may cause
sparks, burns, or a fire.
7. After charging or before attempting any maintenance
or cleaning, unplug the charger from the power
source.
8. Do not touch the inside of the flashlight head with
tweezers, metal tools, etc.
9. Under abusive conditions, liquid may be ejected from
the battery, avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
10. Do not short the battery cartridge:
(1) Do not touch the terminals with any conductive
material.
(2) Avoid storing battery cartridge in a container with
other metal objects such as nails, coins, etc.
(3) Do not expose battery cartridge to water or rain.
A battery short can cause a large current flow,
overheating, possible burns and even a breakdown.
11. If electrolyte gets into your eyes, rinse them out with
clear water and seek medical attention right away. It
may result in loss of your eyesight.
12. Be careful not to drop or strike battery.
13. Do not incinerate the battery cartridge even if it is
severely damaged or is completely worn out. The
battery cartridge can explode in a fire.
CAUTION:
1. When the tool is not in use, always switch off and
remove the battery cartridge from the tool.
6. Sub LED (1 pc.)
7. Metal Hook
DML806
DC 14.4 V/18 V
Main LED (10 pcs.)
when lit
Approx. 8.0 hours
Approx. 6.0 hours
Approx. 8.5 hours
Approx. 11 hours
Approx. 16 hours
Approx. 21 hours
Approx. 25 hours
0.4 kg
Sub LED (1 pc.)
when lit
Approx. 24 hours
Approx. 17 hours
Approx. 23 hours
Approx. 33 hours
Approx. 46 hours
Approx. 59 hours
Approx. 71 hours
3