Everycom EC300 User Manual page 11

HOW TO : LOAD PAPER
EC300 Thermal receipt printer uses 58mm thermal paper roll, please make sure you have the correct paper
roll for the printer.
1. Remove the seal on the thermal printing paper.
2. Firmly hold the top flip cover of the printer with your forefingers
and pull the cover upward direction to open the flip cover.
Image for reference purpose only, Model used may differ than actual model.
3. Put the thermal paper roll in the paper holder according to this image.
Image for reference purpose only, Model used may differ than actual model.
4.Pull a little portion of paper outside the paper holder,
Close the flip cover and tear off excess paper.
Image for reference purpose only, Model used may differ than actual model.
Note : Be careful on the roll direction, if reverse direction , printer won't be able to print the content.