Safety Summary - Tektronix 7D01 Instruction Manual

7801 Instruction
(SN
8020000 & up)
SAFETY SUMMARY
The following safety information is provided to ensure safe operation of this instrument. WARNING information i s intended
to protect the operator; CAUTION information is intended t o protect the instrument.
i
he following are general safety pre-
cautions that must be observed during all phases of operation and maintenance.
Ground the Instrument
To reduce electrical-shock hazard, the mainframe (oscilloscope) chassis must be properly grounded. Refer to the mainframe
manual for grounding information.
Do Not Operate in Explosive Atmosphere
Do not operate this instrument in an area where flammable gases or fumes are present. Such operation could cause an
explosion.
Avoid Live Circuits
Electrical-shock hazards are present in this instrument. The protective instrument covers must not be removed by operating
personnel. Component replacement and internal adjustments must be referred to qualified service personnel.
Do Not Service or Adjust Alone
Do not service or make internal adjustments to this instrument unless another person, capable of giving first aid and resusci-
ta tion, is present.