Related Manuals for KLINGER PS116
Summary of Contents for KLINGER PS116
- Page 1 Ultrasonic Flowmeter Operation Manual Side 1 Ultrasonic Flowmeter Type PS116 Operation Manual KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk...
- Page 2 Please refer to the version number and the appendix for more information. KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk...
- Page 3 Make sure that there is no damage to the enclosure due to loose screw or wires or other damage that may have occurred during transportation. Any questions, please contact your representative as soon as possible. KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk...
-
Page 4: Table Of Contents
4.7.2 Install or Remove the SD card while the meter is powered on................ 21 4.7.3 Reading the TF Data Offline ........................... 21 4.7.4 SD Card Storage Operation ..........................22 4.8 ESN..................................23 KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk... - Page 5 OUND ELOCITY FOR ARIOUS ATERIALS OMMONLY 8.3 S ..............49 OUND ELOCITY ATER IFFERENT EMPERATURES Update information: __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk...
-
Page 6: Transmitter Installation And Connection
Any parameters which are set by the user will be saved permanently until they are changed by the user. When the user modifies the parameters or removes the transducers, the meter will recalculate automatically, and KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk... -
Page 7: Keypad Functions
Example 1: To enter a pipe outer diameter of 200mm, the procedure is as follows: Press to enter Menu11 (the KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk... -
Page 8: Flowmeter Menu Descriptions
(menu 92), total time and delta time of the measured signal (menu 93), Reynolds number and K factor (menu 94). +0~+4 Appendix: Power on/off time, total working hours, on/off times etc. 4~20mA correction menu. KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk... -
Page 9: The Quick Setup Instructions
Press the display Signal Strength of M90. St r e n gt h +Qu a l i t y [ 9 0 Q=9 7 Q=97 KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk... - Page 10 Press Men u Enter input Pipe Wall Thickness of M12. Pi pe W al l Thi c k nes s Q=97 KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk...
- Page 11 Q=9 7 Press Me n u Start/stop manual totalizer in turn. 20 2 s e c 2. 1 25 Q=0 0 KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk...
- Page 12 Press Me n u Enter setup time of M60. YY- MM- DD 1 0 - 03 - 0 8 Q=9 7 KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk...
-
Page 13: For Example
Pi p e W a l l Thi c k n e s s then press the key. Q=9 7 KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk... - Page 14 Mo u nt i ng key to select transducer-mounting from the drop-down menu, then press the key. (Details on Chapter 4.1) Q=9 7 KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk...
-
Page 15: Measurement Site Selection
Consider the inside condition of the pipe carefully. If possible, select a section of pipe where the inside is free of excessive corrosion or scaling. Choose a section of sound conducting pipe. KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk... -
Page 16: Transducer Installation
3. Refer to 2.15 for the Transducer Mounting Spacing. KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk... -
Page 17: Transducer Mounting Methods
The measurement accuracy can be improved by extending the transit distance with the N method ( uncommonly used ). KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk... -
Page 18: Transducer Installation And Fixing
± Generally, "Delta Time" fluctuation should be less than 20%. Only when the pipe diameter is too small or KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk... -
Page 19: Transit Time Ratio
“0”, this value indicates "Zero". To any measuring instrument, the smaller the "Zero" is, the better the quality is. KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk... -
Page 20: Scale Factor
20mA verification using the same procedure as for the 4mA verification. The calibration results will be automatically saved in EEPROM and won’t get lost even if power off. KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk... -
Page 21: Tf Card Operation
1. File converter (Click the "Offline" button and enter the Document Conversion Interface). Press "Converter" button, convert the T card data format from ".TXT "to ".XLS", the interface is as follows: KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk... -
Page 22: Sd Card Storage Operation
The above picture shows the normal operation interface. (If it does not work normally, will be shown as the picture below.) KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk... -
Page 23: Esn
The ESN is able to be viewed in Window M61. Attention Please refer to "6.2 Windows Display Explanations" for more information. KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk... -
Page 24: Window Display Explanations
CL Checkup Cross-sectional Area CL Current Output Holding with Poor Sig NOTE：The factory maintains the final explanation for other menu features. KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk... -
Page 25: Display Explanation
If the negative Totalizer has been turned off (refer to 0 x 1 M36), the value displayed is total the total that existed prior to turning it off. Q=9 7 KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk... - Page 26 M11. Pi p e Ou t er Pe r i me t e r 5 0 0 Q=9 7 KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk...
- Page 27 Car b o n St eel keys): 0. Carbon Steel Q=9 7 1. Stainless Steel 2. Cast Iron 3. Ductile Iron 4. Copper 5. PVC KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk...
- Page 28 Enter liner sound velocity. It only can be visited when item “ Other” in Window M16 is selected. 1 3 2 8 m/ s Q=9 7 KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk...
- Page 29 Fl u i d So u n d Ve l o c i t y is unnecessary to enter all the fluids listed in Window M20. 1 4 2 8 m/ s Q=9 7 KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk...
- Page 30 . An ID code and the original parameters are displayed in the window. Press UP or DOWN ARROW to move the ID code, KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk...
- Page 31 It should be understood that the instrument is NOT designed to function correctly on an empty pipe. KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk...
- Page 32 0.001 (1E-3) x 0.01 Q=9 7 x 0.1 x 10 x 100 x 1000 x 10000(1E+4) Factory default factor is x1 KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk...
- Page 33 ATTENTION: This operation will cancel all the data and revert back to factory default. Be careful with this operation. KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk...
- Page 34 Point” resulting from different pipe The measuring accuracy at low flow is enhanced by doing this function and flow offset is eliminated. KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk...
- Page 35 The user can enter a numerical value other than “1” according to calibration results. 0 0 0 0 Q=9 7 KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk...
- Page 36 Window M31. Once “velocity 4-20mA”is selected in Window M55, the unit should be set as m/s if it is the Q=9 7 velocity unit selected KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk...
- Page 37 1 3 - 0 1 - 0 1 1 6 , wait until “>” appears, the modification can Q=9 7 be made. KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk...
- Page 38 [ 7 7 Beeper Setup Set the beeper’s on-off status. “ON” the beeper function open. Q=9 7 “Off:”the beeper function shut down. KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk...
- Page 39 00 ～ 99. Therefore, 00 indicates the poorest signal while 99 indicates the best signal. Normally, signal quality Q value should be better than KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk...
- Page 40 Flowmeter. Normally this scaling factor is the average of the line and surface velocity factor inside the pipe. 0 0 0 0 Q=9 7 KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk...
- Page 41 Last Power Off Time Display the last power off time. 1 3 - 0 1 - 0 1 1 6 Q=9 7 KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk...
- Page 42 4 - 2 0 mA [ - 0 Pr e s s ENT W h e n Re a d y Q=9 7 KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk...
-
Page 43: Error Diagnoses
Carefully select a good pipe section and fully clean it, apply a wide band of coupling compound on each transducer face (bottom) and install the transducer properly. KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk... - Page 44 Answer: Check to see if “Set Zero” was carried out with fluid flowing inside the pipe (Refer to Window M42). If it is confirmed, recover the factory default in Window M43 KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk...
-
Page 45: Product Overview
Ultrasonic frequency of reflection Pipe Diameter θ The angle between the ultrasonic signal and the flow Transit time in the forward direction Tdown Transit time in the reverse direction ΔT=Tup –Tdown KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk... -
Page 46: Applications
Petroleum and chemicals; Food and medicine; Energy-saving monitoring, water-saving management and flow inspection flow tracking and collection, computerized management and monitoring network system. KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk... -
Page 47: Specifications
Measuring medium: - 40℃～80℃（Standard） Humidity 0~99%RH, non-condensing Physical Transmitter NEMA13 (IP54) Encapsulated design, IP68 Transducer Standard cable length: 5m Transmitter: 1kg Weight KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk... -
Page 48: Appendix1 - Flow Application Data
Bronze Rubber 3430 Fiber glass-epoxy 3276 Glass 1950 Polyethylene 2540 Liner Material Sound Velocity (m/s) PTFE 1225 3150 Titanium 4190 Cement KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk... -
Page 49: Sound Velocity In Water (1 Atm) At Different Temperatures
1509.0 1544.7 1553.0 1511.3 1543.9 1553.4 1513.5 1553.7 Please contact the manufacturer for the sound velocity of other fluids and materials. KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | salesinstrumentation@klinger.dk | www.klinger.dk... - Page 50 KLINGER Danmark A/S Nyager 12-14 DK-2605 Broendby Denmark Phone +45 4364 6611 www.klinger.dk...
Need help?
Do you have a question about the PS116 and is the answer not in the manual?
Questions and answers