Panasonic PT-52DL52 Operating Instructions Manual page 12

Installation
2. Connecting a PC to DIGITAL IN
When connecting a PC to DIGITAL-IN, be sure to select "PC" from the INPUT LABEL menu. Failing to do so may result in
a distorted display or black out (refer to page 36).
PC with digital
RGB video out
Note:
If your PC does not support the Plug-and-Play capability (DDC1/2B) for displays, it will require reconfiguration after the
display is connected to the PC.
Digital RGB Input Connector
Pin Layouts
Connection port view
12
DIGITAL IN cable
(Supplied)
K1HA24DA0005 (2 m)
Connect a cable that matches
the audio output terminal on the
computer.
Audio
Signal Name
Pin No.
T.M.D.S. data 2-
T.M.D.S. data 2+
T.M.D.S. data 2 shielded
DDC clock
DDC data
T.M.D.S. data 1-
T.M.D.S. data 1+
T.M.D.S. data 1 shielded
DIGITAL IN terminals
DIGITAL IN
S VIDEO
VIDEO
L
AUDIO
R
1 2 3
PROG
INPUT
OUT
2 RCA plug
Signal Name
Pin No.
+5 V DC
Ground
Hot plug sense
T.M.D.S. data 0-
T.M.D.S. data 0+
T.M.D.S. data 0 shielded
T.M.D.S. clock shield
T.M.D.S. clock+
T.M.D.S. clock-
L
AUDIO
R