Connector Panel - Panasonic PT-AE500U Operating Instructions Manual

Projector
<Back and bottom>
$
%
# Air outlet port
Do not cover this port.
$ Connector panel (page 13)
% Power input socket (AC IN) (page 22)
The accessory power cord is connected here. Do not use any power cord
other than the accessory power cord.
& Lamp unit holder (page 47)
' Security lock
This can be used to connect a commercially-available theft-prevention
cable (manufactured by Kensington). This security lock is compatible with
the Microsaver Security System from Kensington.
WARNING
Do not place your hands or other objects close to the air outlet port.
B Heated air comes out of the air outlet port. Do not place your hands or
face, or objects which cannot withstand heat close to this port, otherwise
burns or damage could result.
12-E
NGLISH
#
'
&

Connector panel

# $ %
(
# TRIGGER output jack (pages 18, 19 and 20)
This jack outputs 12 V when the power is turned on. Connect this jack to
equipment such as an electric screen.
$ S-VIDEO input connector (page 18)
This connector is used to input signals from an S-VIDEO-compatible
equipment such as a video deck.
% DVI-D IN connector (page 20)
This connector is used to input DVI-D signals.
& RGB input connector (page 20)
This connector is used to input RGB signals from a PC.
' YP
P (C C ) input jacks(page 19)
B R B R
These jacks are used to input YP
such as a DVD player.
( VIDEO input jack (page 18)
This jack is used to input video signals from a video equipment such as a
video deck.
& '
P signals from compatible equipment
B R
E
NGLISH
-13