Table of Contents
Advertisement
Using Your Microwave
Oven
Continued
14
6. Touch START. The COOK 1 and COOK
POWER Indicator Lights will stay on to show
that the oven is cooking in the first cycle at a
Cook Power other than HIGH.
The Display counts down the time to show
how much cooking time is left in the first cycle.
For 2 of every 10 seconds, the Display will
show the Cook Power you selected.
When the cooking time ends, "End" will show
on the Display and 4 beeps will sound. (You can
stop the beeping by opening the door or by
touching CANCEL.) "End" will remain on the
Display and a reminder tone will sound every 30
seconds (to remind you that food is left in the
oven) until the door is opened or CANCEL is
touched. The Display will then show the time of
day.
Changing
the cook power
The Cook Power can be changed any time before
or after touching START:
1. Touch COOK POWER.
2. Touch a Number Pad for the new Cook Power.
3. Touch START. The cycle will cook at the new
Cook Power for the original time.
OR..
1. Touch COOK POWER twice if you want to
change a lower Cook Power to HIGH.
2. Touch START.
Using AUTO SET
Auto Set provides ten preset times. One to nine
minutes at HIGH Cook Power can be selected by
touching AUTO SET and the corresponding
Number Pad (l-9). You don't need to touch any
additional Number Pads as you do when using
COOK 1 or COOK 2. This provides a short-cut
method for setting commonly used cooking times.
The AUTO SET chart included with your
microwave oven and the AUTO SET guide on the
inner door panel helps you cook various food items
without having to look up the cooking times.
A preset time of 2 minutes, 30 seconds at HIGH
Cook Power is available by touching just the AUTO
SET pad. The time may be changed to any time
from O-99 minutes, O-99 seconds, allowing you to
store your favorite cooking time and Cook Power,
or to preprogram the oven for someone else to
cook an already prepared dish at a later time. See
page 16 for instructions.
Advertisement
Table of Contents
