Using Auto Set - Whirlpool MW3600XW Use And Care Manual

6. Touch START.
d
count
own
BEEP @JEEP BEEP
Changing cook power
The COOK 1 and COOK POWER
Indicator Lights will stay on to show
that the oven is cooking in the first
cycle at a Cook Power other than
high
The Display Counts down the ttme to
show how much cooking time IS left
in the first cycle
For 2 ot every 10 seconds. the Display
will show the Cook Power you
selected
When the cooking time ends, "End"
will show on the Display and 4 beeps
will sound. (You can stop the beeping
by opening the door or by touching
CANCEL.] "End" will remain on the Dis-
play and a reminder tone will sound
every 30 seconds until the door is
opened or CANCEL is touched. The
Display will then show the time of day.
The
Cook Power
can be changed any time before touching START or during the cycle.
. Touch COOK POWER.
l
Touch a number for the new Cook Power.
l
Touch START. The cycle will cook at the new Cook Power for the original time.
OR..
l
Touch COOK POWER
twice
if you want to change a lower Cook Power to HIGH.
l
Touch START.
Using AUTO SET
Auto Set provides ten preset times. One to nine minutes at HIGH cook power can be set
by touching AUTO SET and the corresponding number pad l-9. This provides a short-cut
method for setting commonly used cooking times.
The AUTO SET chart included with your microwave oven and the AUTO SET guide on
the inner door panel helps you cook various food items without having to look up the
cooking times.
A preset time of 2 minutes, 30 seconds at HIGH cook power is available by touching
just the AUTO SET pad. The time may be changed to any time from O-99 minutes, O-99
seconds allowing you to store your favorite cooking time and Cook Power, or to
pre-program the oven for someone else to cook an already prepared dish at a later
time. See page 11 for instructions.
DO THIS...
THIS HAPPENS...
1.
Pui food In the oven and
close the door.
continued on next page
9