Do you have a question about the 177HEAT1836 and is the answer not in the manual?
Questions and answers
Mike
April 10, 2025
I need to purchase a new box. cabinet is ok
1 comments:
Mr. Anderson
April 10, 2025
The listing is for a used Avantco 177HEAT1836 holding cabinet and does not mention the availability of a new box. You may contact the seller directly to inquire about purchasing a new box.
Page 1
User Manual User Manual Heater/Proofer Cabinets Models: 177HEAT1836, 177HPI1812, 177HPI1836, 177HPU1812, 177HPU1836 09/2020 Please read and keep these instructions. Indoor use only. www.AvantcoEquipment.com...
Water dripping onto the floor from open doors can be a slip hazard. Identifying Your Cabinet MADE IN CHINA For future reference, cord the cabinet model number and serial ITEM: 177HEAT1836 number found on the serial plate located on the rear of the cabinet. MANUFACTURER ITEM: DESCRIPTION : UNINSULATED FULL SIZE HEATING MODEL: _____________________________ SERIAL#: _________________ &...
Half Size Non-Insulated 120V 1440W 23.1" x 33.2" x 30.6" 177HPI1812 Holding/Proofing Half Size Insulated 120V 1440W 23.1" x 33.4" x 31.6" 177HEAT1836 Heating Only Full Size Non-Insulated 120V 1440W 23.1" x 33.2" x 66.5" 177HPU1836 Holding/Proofing Full Size Non-Insulated 120V 1440W 23.1"...
User Manual Installation 1. Upon delivery of the unit, check for shipping damage. Check the packaging and cabinet for shipping damage after unloading the unit, and after removing all packaging. Notify freight company immediately of shipping damage with pictures and description. INSTALLATION 2.
User Manual Operating Instructions 1. Refer to the Serial Plate for electrical requirements. These cabinets are rated at 120V 1500W and must be plugged into a dedicated grounded 120V 15 or 20 Amp outlet. NOTE: modification of cord and plug will void warranty and may cause the unit to be inoperable. 2.
User Manual HEATING/HOLDING INSTRUCTIONS The temperature range for heating/holding control is 80-185°F. The dial numbers 1-9 do not correspond or relate to a specific calibrated temperature. Exact temperature settings must be obtained through familiarization with the unit and are dependent on the ambient environment temperature and conditions where the unit is placed. The dial also has an OFF position to turn the heater off.
User Manual Troubleshooting CAUTION Before disassembling unit, electrical power must be disconnected by unplugging the unit. Failure to unplug the unit prior to servicing may result in electrical shock. Each unit is shipped with this instruction manual and should be used as a reference guide for all service areas. The manual provides a picture of the drawer, showing the location of electrical components and a description of each.
Equipment Limited Warranty Avantco warrants its equipment to be free from defects in material and workmanship for a period of 1 year. This is the sole and exclusive warranty made by Avantco covering your Avantco brand equipment. A claim under this warranty must be made within 1 year from the date of purchase of the equipment.
Need help?
Do you have a question about the 177HEAT1836 and is the answer not in the manual?
Questions and answers
I need to purchase a new box. cabinet is ok
The listing is for a used Avantco 177HEAT1836 holding cabinet and does not mention the availability of a new box. You may contact the seller directly to inquire about purchasing a new box.
This answer is automatically generated