Cisco Firepower 4100 Series Manual page 2

Features
The Firepower 4100 series is certified for the following security standards on ASA 9.12.x and FTD 6.4.x:
• DoDIN APL
See the "Security Certifications Compliance" chapter in the
FXOS Firepower Chassis Manager Configuration Guide
The following figure shows the Firepower 4100 series security appliance.
Figure 1: Firepower 4100 Series
See the Cisco Interactive Library
The following table lists the features for the Firepower 4100 series.
Table 1: Firepower 4100 Series Features
Feature
Form factor
Rack mount
Airflow
Processor
Memory
Maximum number
of interfaces
Management port
Serial port
USB port
Overview
2
for a video that displays the features and components of the Firepower 4100.
4110 4120
1 RU
Fits a standard 19-in. (48.3cm) square-hole rack
Yes
Slide rails, mount ears, and screws included (4-post EIA-310-D rack)
Front to rear
Cold aisle to hot aisle
Single 12-core
64-GB DDR4 128-GB DDR4
DRAM DRAM
24
With two 8-port network modules installed
One Gigabit Ethernet
Supports 1-Gb fiber or copper SFPs
One RJ-45 console
One USB 2.0 Type A
Cisco FXOS CLI Configuration Guide
for the procedure to enable security modes.
4140
Single 18-core
256-GB DDR4
DRAM
Overview
or Cisco
4150
Single 22-core
256-GB DDR4
DRAM