Advertisement
Adjusting the Encoder Reader
1. Attach the E
Positioning the Encoder Reader
2. Place the E
correctly aligned with each other and tighten the screws, as shown below.
Aligning the sensor and the bracket on a flat surface
3. Using two screws, washers and spring washers, attach the B
C
ARRIAGE
10100139 - C
R
to the Bracket as shown below.
NCODER
EADER
R
and the B
NCODER
EADER
, as shown below.
© Matan Digital Printers Ltd.
Securing the Encoder Reader
on a flat surface so they will be
RACKET
to the
RACKET
Page 8 of 13
Advertisement
