Table of Contents
Advertisement
1.1 Applicable documents
A6V10227637_j_en_--
1 About this document
Goal and purpose
This document contains all the information required to install detector base
FDB271 and radio fire detector FDOOT271.
Prerequisites:
●
The installation location of the radio fire detector has been established.
●
Mounting should be performed by a specialist in compliance with safety
regulations.
You will find more information on the radio fire detector in document
A6V10227635 'Technical Manual Radio fire detector FDOOT271'.
You will find information on how to integrate the radio fire detector into a radio cell
in document A6V10227639 'Technical manual Radio gateway FDCW241'.
Intended use
The radio fire detector FDOOT271 may only be used in a detector base FDB271
and together with a radio gateway FDCW241 in a fire detection system FS20/
FS720.
Document ID
001508
008331
009409
010030
A6V10208552
A6V10227631
A6V10227637
A6V10227639
A6V10227643
A6V10229261
A6V10254740
A6V10271323
A6V10367669
Title
Guidelines Connection factors, line resistances and
capacitances for fire detection systems collective,
AnalogPLUS, interactive, FDnet
List of compatibility (for 'Sinteso™' product line)
Data sheet Colored detectors, bases and base
attachment FDO.., FDOOT..., FDT..., FDB..., FDCW241
Application guideline Sinteso Fire detectors
Installation Detector locking device FDBZ293
Planning Radio fire detection system SWING
Installation Radio fire detector FDOOT271, Detector base
FDB271
Technical manual Radio gateway FDCW241
User Guide SWING-Tool FXS2061
List of compatibility (for 'Cerberus™ PRO' product line)
Operating instructions Solo461 heat detector tester kit
RE7T
Data sheet SWING Neural radio fire detector FDCW241,
FDOOT271, FDM273, FDM275, FDM275(F)
Open-Source Software (OSS) Licenses SWING
About this document
Applicable documents
5 | 22
1
Advertisement
Table of Contents
