Mooer Micro Series Owner's Manual

Blues Drive Pedal
Main Features
Ÿ Wide range frequency response blues style overdrive sound, also
sounds good on bass
Ÿ 2 Working Modes: Bright/Fat
Ÿ Full metal shell
Ÿ Very small and exquisite
Ÿ True bypass
DC 9V Adapter power supply
Bright: Transparent tube-like overdrive tone.
Fat: Add a bit of natural low end to get a rich and vigorous sound.
3
6
7 8
TONE
9
4
GAIN
5
6. Mode Switch: Switch between Bright mode and Fat mode.
7. LEVEL Knob: Adjust the output level.
8. TONE Knob: Adjust the brightness of tone.
9. GAIN Knob: Adjust the gain.
Working Mode: 2 (Bright/Fat)
Input: 1/4" monaural jack (impedance: 1M
Output: 1/4" monaural jack (impedance: 1k Ohms)
Power Requirements: AC adapter 9V DC (center minus plug)
Current Draw: 14 mA
Dimensions: 93.5mm (D) × 42mm (W) × 52mm (H)
Weight:160g
Accessories: Owner's Manual
*
Disclaimer: Any specification's update won't be amended in this manual.
1. TRUE BYPASS Footswitch:
Push down the footswitch
to switch between effects
and bypass status.
2. ON/OFF LED:
Instructs effects or bypass
status of Blues Mood, when
the LED is lit up, the effects
is on.
3. DC IN Power Jack:
For power supply, use a 9-volt
DC regulated AC adapter(plug
polarity is positive on the barrel
and negative in the center).
4. INPUT Jack:
1/4" mono audio jack, for
connecting guitar.
5. OUTPUT Jack:
1/4" mono audio jack, outputs
the signal.
Ohms )