Caring For The Filters - Roper MHEI IRD Use And Care Manual

Whirlpool microwave hood combination mhei ird use and care guide
Table of Contents

Advertisement

Caring
for the filters
The grease filters should be removed and
cleaned often, at least once a month.
NOTE:
If your microwave hood combination
is installed to recirculate air, the charcoal
filter (Part No. 4158311 [black] or 4158439
[white]) should be replaced every 6-12
months. The charcoal filter cannot be
cleaned.
Before
caring
for filters:
l
For your personal safety,
turn off
the
electric power at the main power supply.
Grease
filters
1. To remove grease filters, slide
each
filter to the side.
Pull
filters downward
and
push
to the other side. The filter
will drop out.
2.
Soak
grease filters in hot water and a
mild detergent.
Scrub and swish
to
remove embedded dirt and grease.
Rinse well and shake
to dry.
Do not use
ammonia or place in a dishwasher. The
aluminum will darken.
3. To replace grease filters, slide
filter in
the frame slot on one side of the opening.
Push
filter upward and
push
to the other
side to lock into place.
Charcoal
filters
To remove:
1. Remove
the vent cover mounting screws.
2. Tip
the cover forward, then
lift out
to
remove.
3.
Llft
the back of the charcoal filter.
Slide
the filter straight out.
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mhe11rd

Table of Contents