Setting The Clock - Roper MHEI IRD Use And Care Manual

Setting the clock
When your microwave oven is first plugged
in, or after a power failure, the Display will
show "888:88". For the first 30 seconds after
the power is on, you can set the clock time
without touching CLOCK SET. After 30
seconds has gone by, you must follow the
directions below to set the time. If a time of
day is not set, "888:88" will show on the
Display until you touch CLOCK SET.
To set time:
1. Choose setting.
NOTES:
l
You can
only set the clock if the oven is
not cooking food.
l
If you touch in
an incorrect time and
touch CLOCK SET, three tones will sound.
Enter the correct time.
l
If you touch
CANCEL/OFF while setting
the clock, the Display will show the last
time of day set or ":" if no time of day has
been set.
TOUCH
YOU SEE
(for 3 seconds)
2. Enter time of day.
Example for 12:OO:
TOUCH
YOU SEE
III
El
3. Complete entry.
19