Whirlpool MHE10RW Care Manual page 8

3. Touch Number Pads tor
cooklng tlme you want.
The display will show the numbers you
touched
In the order you touched
them.
The example shows 1 minute,
30 seconds.
4.
Touch START.
d
count
awn
The oven will automattcally cook at
HIGH Cook Power.
The TIME Indicator Light will stay on to
show that the oven is cooking In the
cycle.
The Display counts down the time to
show how much cooking time is left.
When the cooking time ends, "End"
will show on the Display and 4 beeps
will sound. (You can stop the beeplng
by opening the door or by touching
CLEAR.] "End" will remain on the
Display and a remtnder tone will
sound every 60 seconds (to remind
you that food is left in the oven) until
the door is opened or CLEAR is
touched. The Dtsplay will then show
the time of day
Changing the Cooking Time
Cooking time can be changed any time before touching START or during the cycle:
1. Touch TIME.
2. Touch numbers for the new time.
3. Touch START.
Oven will continue cooking for the new time.
Cooking at Lower Cook Powers
For best results, some recipes call for lower Cook Powers. The lower the Cook Power, the slower
the cooking. Each Number Pad also stands for a different percentage of Cook Power. Recipes in
cookbooks and magazines may tell you by name (HI, MED, LO, etc.) or percentage (lO%, 50%,
80%, etc.).
The following chart gives the percentage of Cook Power each Number Pad stands for, and
Cook Power name usually used.
automatic 100% of full power HIGH
9 = 90% of full power
8 =
80% of full power
7 = 70% of full power MED-HIGH
6 = 60% of full power
5 = 50% of full power MED
4 = 40% of full power
3 = 30% of full power MED-LOW
2 = 20% of full power
1 = 10% of full power LOW
0 = no power [fan and light will be off)