Whirlpool MHE10RW Care Manual page 16

8.
Touch a Number Pad for
the Cook Power you want.
The Display will show what you
touched. This example shows you
touched Number Pad 7 for 70%
of full power.
9.
Touch START.
The DELAY START Indicator Light will stay
on. All other Indicator Lights will go off.
The Display will go back to showing
the time of day.
When the time of day reaches the time
you have set in DELAY START, the DELAY
START Indicator Light will go off, 2
beeps will sound, the TIME and POWER
Indicator Lights will come on, the cook-
ing time will show in the Display, and
the oven will start cooking.
The Display counts down the time to
show how much time is left.
For 2 of every IO seconds the Display
will show the Cook Power you
selected. If you are using a Cook
Power other than HIGH.
When the cooking time ends, "End"
will show on the Display and 4 beeps
will sound. (You can stop the beeping
by opening the door or by touching
CLEAR.) "End" will remain on the
Display and a reminder tone will
sound every 60 seconds (to remind
you that food is lefi in the oven) until
the door is opened or CLEAR is
touched. The Display will then show
the time of day.
NOTE: If the oven light and fan come
on when you touch START, the Start
Tlme has not been set correctly.
Open and close the door, reprogram
DELAY START time, then touch START.
16