Table of Contents
Advertisement
The Cooktop light:
Electrical
Shock Hazard
Turn ott power ai maln
power supply betore re-
placlng the light bulb.
Failure to do so could re-
sutt In electrlcal
shock.
The Oven light:
2.
Remove the five screws
holding
the bottom panel
in place.
3. Lower the front of the
panel. Slide the panel
forward
to remove.
2.
Remove the vent cover
4. Remove
bulb holder
mounting
screws,
mounting
screw.
Electrical
Shock Hazard
Turn otl Dower at maln
3. Tip the cover forward, then
lift out to remove.
I
power siupply before re-
placlng
the light bulb.
Failure to do so could re-
sult In electrical
shock.
4. Remove shipping
tape from
bulbs - if still in place
-
before
removlng
bulbs.
5. We recommend
replaclng
bulb(s) with candelabra
base 30-watt bulb(s) avail-
able from your authorized
Ropep
service
company
(Part No. 4158432).
6.
Replace
the bottom panel
in reverse order.
tl
i
6.
We recommend
replacing
bulb(s) with candelabra
base 30-watt bulb(s) avail-
--.
able from your authorized
5. Slide bulb holder out,
then turn towards
front to
remove
bulb from oven.
Roper servrce company
(Part No. 4158432).
7. Replace
the bulb holder
and mounting
screw
8.
Slide the top of the vent
cover into place.
Push the
bottom until it snaps into
place.
Replace
the mount-
ing screws. Turn the power
back on at main power
supply.
21
Advertisement
Table of Contents
