Hobart AMXXT Series Installation & Operation Manual page 6

A
B
C
6
– Lift up control box and turn it to front.
TO CONNECT A LIQUID DETERGENT DISPENSER:
– Remove blanking plug (A) at tank (either at the right or left tank).
– Install detergent inlet fitting + gasket (B).
– Connect a hose (PVC / 6mm outside Ø x 4mm inside Ø) between
B
– Install dosage pump or fit external dispenser.
– Connect the plug (C) of the wire harness with the dosage pump
outlet of the detergent pump and the detergent inlet (B) of the
wash tank. Tighten with hose clamp.
(max. 100 VA).