Download Print this page

Husqvarna LT 8005 Operator's Manual page 3

Hide thumbs Also See for LT 8005:

Advertisement

14. Rammer shoe
Throttle control
The throttle control has 3 available positions:
Operation mode position (A)
Start position/idle speed position (B)
Stop position (C)
A
Symbols on the product
WARNING: This product can be dangerous
and cause serious injury or death to the
operator or others. Be careful and use the
product correctly.
Read the manual carefully and make sure
that you understand the instructions before
you use the product.
Use hearing protection.
Use boots with steel toe-cap and non-slip
sole.
Hot surface.
The spring can eject and cause injury.
1167 - 003 - 09.03.2020
B
C
Ultra-low-sulfur diesel fuel only.
Lift the product at this part of the safety
frame.
Noise emission to the environment as
referred to in the EC directive. The emission
of the product is specified in
on page 13 and on the label.
This product is in compliance with applicable
EC directives.
Note: Other symbols/decals on the product refer to
special certification requirements for some markets.
Type plate
1 2
3
4
5
1. Product type
2. Serial number with production date, year, week and
sequence number
3. Rated power
4. Product weight
5. Brand
6. Manufacturer and manufacturer address
7. Product number
8. Production year
Euro V Emissions
WARNING: Tampering with the engine voids
the EU type-approval of this product.
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
the product is incorrectly repaired.
the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
Technical data
6
7
8
3

Hide quick links:

Advertisement

loading