Advertisement
Land Pride
Section 2: Operating Procedures
To Decrease Speed and Stop
!
WARNING
In the event of a system shutdown while mowing, move control
levers to neutral and spread them fully apart. See Figure 2-4
on Page 14. Also, engage the park brake lever to aid in
slowing and stopping the mower.
Refer to Figure 2-7 on page 17:
Moving control levers an equal distance towards neutral
will decrease travel speed.
•
When moving forward, pull back gently on control
levers to decrease speed. The further back the control
levers are pulled the slower the travel speed until
neutral is reached.
•
When backing up, push forward gently on control
levers to decrease speed. The further forward the
control levers are pushed the slower the travel speed
until neutral is reached.
•
Move control levers to neutral to stop.
•
Spread both control levers fully apart and engage the
park brake.
2/10/09
Table of Contents
Front of Mower Faces This Direction
Figure 2-7
To Steer
Refer to Figure 2-7 on page 17:
•
To Steer Straight While Traveling Forward:
•
To Steer Straight While Backing Up:
•
To Turn Left While Traveling Forward:
•
To Turn Left While Backing Up:
•
To Turn Right While Traveling Forward:
•
To Turn Right While Backing Up:
•
To Make A Pivot Turn:
ZXT54 & ZXT60 Pro Series Zero Turning Radius Mowers Riding Mowers 357-271M
Push control levers forward an equal distance.
Pull control levers rearward an equal distance.
Move right control lever farther forward from neutral
than the left control lever.
Move right control lever farther back from neutral
than the left control lever.
Move left control lever farther forward from neutral
than the right control lever.
Move left control lever farther back from neutral
than the right control lever.
Move one control lever forward and the other
control lever back of neutral, this will allow the drive
wheels to counter-rotate.
25880
17
Advertisement
