Using Usb Decoding - PrimaLuna EvoLution Series Manual

Using USB Decoding on a Windows computer
1. Install the appropriate driver on your computer (see page 8).
2. Connect the USB port of the DAC to the USB port of a computer.
3. Select the USB input from your DAC.
4. Once the DAC can lock into the USB connection, the screen will display the bit rate and
sampling frequency for your reference.
Please setup your playback software, such as Foobar2000, in your computer correctly, otherwise,
the system will not be able to output the original unaltered bitstream to the DAC for decoding.
You might need to install a plugin such as ASIO or WASAPI to achieve that (see page 10).
Using USB Decoding on an Apple (MAC) computer or audio network streamer
1. Connect the USB port of the DAC to the USB port from your Apple (MAC) computer or
audio network streamer.
2. Select the USB input from your DAC.
Ps. There is no driver needed.
EvoLution Series
9