Advertisement
Up to now, users have already completed the whole installation,
please restart system as prompted.
Once the board and driver are installed and the system restart
successfully, users can execute any ready-made application such as
HyperTerminal to transmit/receive data or Remote Access Service
to provide dial-up networking capability.
You will enter the configuration program when installing the device
driver. Or you can click on the Taskbar [Start] button, then select
[Programs] menu, then [Advantech Icom Utility] menu and then
[Icom] icon.
When the configuration panel is popped up:
Click [Add Board] button to add a board.
Click [Delete] button to remove a board.
Board Type: PCL-858
Base COM: Specify the COM number of the first port and subsequent
ports are mapped to continuous COM numbers. For instance, if the
first port is mapped to COM10, then the second port is mapped to
COM11 sequentially.
Base Address (200H~3F8H): Specify the base address of the first port
and subsequent base address are mapped to continuous COM
numbers. For instance, if the first port is mapped to 300H, then the
second port is mapped to 308H sequentially.
Chapter 3 Software Installation
21
Advertisement
