Panasonic CF-31 Series Operating Instructions Manual page 18

Installing Software
8 Select the [Exit] menu, then select your DVD drive in [Boot Override] and press
The computer will restart.
9 Click [Reinstall Windows] and click [Next].
10 At the confirmation message, click [YES].
11 At the License Agreement screen, click [Yes, I agree to the provisions above and wish
to continue!] and click [Next].
12 <For MUI OS model>
Click [Next].
If the option is displayed, select the setting and click [Next].
l [Reinstall with HDD recovery partition.]
Standard recovery method.
You can use recovery from Recovery Partition.
l [Reinstall without HDD recovery partition.]
Increase usable HDD size.
You can NOT use recovery from Recovery Partition.
When this option is selected, you can no longer create Recovery Disc(s) after the recovery operation.
CAUTION
l Carefully choose above item because you cannot change it later.
13 Click [Next].
If the option is displayed, select the setting and click [Next].
l [Reinstall Windows to the whole Disk to factory default.]
Select this option when you want to install Windows to the factory default. After installation, you can create a
new partition. For how to create a new partition, refer to "To change the partition structure" (è page 11).
l [Reinstall to the OS related partitions.]
Select this option when the hard disk has already been divided into several partitions and you want to keep
the partition structure. For how to create a new partition, refer to "To change the partition structure" (è page 11).
*2
This does not appear if Windows cannot be installed to the recovery partition and the area usable by Windows.
14 At the confirmation message, click [YES].
15 <For MUI OS model>
Select language and system type (32bit or 64bit) and click [OK].
At the confirmation message, click [OK].
To cancel the recovery procedure, click [CANCEL], and click the
of the screen.
/
Installation starts according to the instructions on the screen. (It will take approximately 30 - 45 minutes.)
l Do not interrupt installation, for example by turning off the computer or pressing Ctrl + Alt + Del .
Otherwise installation may become unavailable as Windows may not start up or the data may be corrupted.
16 When Ending process screen is displayed, remove the Recovery Disc and DVD Drive
and then click [OK].
Turn on the wireless switch.
Follow the on-screen instructions.
Some models may take approximately 40 minutes.
17 When Ending process screen is displayed, click [OK] and then turn off the
wireless switch.
18 Perform the "First-time Operation" (è page 9).
19 Start the Setup Utility and change the settings as necessary.
20 Perform Windows Update.
21 <Only for model with TPM> Clear TPM (è page 15).
18
*2
mark that appears at the top right corner
Enter .