Microwave Oven Control; Display; Progress Bar; Number Codes - Whirlpool GH4155XP Use And Care Manual

When power is first supplied to the microwave oven, a ":" will
blink on the display. Touch CANCEL to stop the blinking. If the ":"
blinks on the display at any other time, a power failure has
occurred. Touch CANCEL and reset the clock if needed.
If "RETRY" blinks on the display for 1 second, an invalid value
has been entered. Retry your entry.
When the microwave oven is in use, the display shows cooking
power, quantities, weights and/or prompts. When the microwave
oven is not in use, the display shows the time of day or Timer
countdown.

MICROWAVE OVEN CONTROL

Display

Progress Bar

The progress bar is a visual picture of the estimated running time
of a cooking cycle. It will appear during Cook, Defrost, Reheat
and Sensor functions. The lines in each of the segments will light
from left to right as the time nears the end. When all 12 lines (all
3 segments) are lit, the cooking cycle is complete.

Number Codes

The microwave oven is preset with shortcut number codes. A
number code includes one or more of the following: cooking
power, cook time and food quantity or weight. See the charts in
the "Cooking" and/or "Reheating" sections for additional
information.
The START pad begins any function. If not touched within
5 seconds after touching a pad, "START?" will appear on the
display as a reminder. If not touched within 1 minute after
touching a pad, the display will return to the time of day mode
and the programmed function will be canceled.
If cooking is interrupted, touching START will resume the preset
cycle (for non-sensor functions only).

Add 30 Seconds

Cook time may be added in 30-second increments, up to
99 minutes, 99 seconds, by touching ADD 30 SEC.
Touching ADD 30 SEC. during a cook cycle will add 30 seconds
of cook time at the current cook power.
Touching ADD 30 SEC. when the microwave oven is not in use, or
after a cook cycle has ended, will start the microwave oven for
30 seconds of cook time at 100% cook power.
The CANCEL pad stops most functions except for the Timer,
Child Lock and Demo Mode.
The microwave oven will also turn off when the door is opened.
Close the door and touch START to resume the cycle (for non-
sensor functions only).

Start

Cancel

7