CONCORD Precision Shank Drill Operator's Manual page 6

1. Safety
To the Owner
It is the responsibility of the user to read the
operators manuals and comply with the correct
operating procedures as pertains to the opera-
tion, lubrication and maintenance of the prod-
uct according to the information outlined in the
Operator's Manual.
If this machine is used by an employee or is
loaned or rented, make certain that the oper-
ator(s), prior to operating, is instructed in the
proper use and reviews and understands the
Operator's Manual. This machine should only
be operated by a trained operator that has
been qualified to operate this machine.
The user is responsible for inspecting the ma-
chine and for having parts repaired or replaced
when continued use of this product would
cause damage or excessive wear to the other
parts.
The word NOTE is used for information that is
special such as specifications, techniques, or
reference information of supplementary nature.
The word IMPORTANT is used for information
that must be read and procedures followed for
the safe and proper operation of the machine.
References to the right (RH) or left (LH) on
the machine are from the view of the operator
sitting in the cab of the tractor.
Precision Shank Drill
Operators Manual - 74356-02
Disclaimer
It is company policy to improve its products
whenever possible and practical to do so. We
reserve the right to make changes, improve-
ments and modifications at any time without
incurring obligation to make such changes, im-
provement on any equipment sold previously.
Serial Number
When in need of parts, always specify the mod-
el and serial number. The serial number plate
is located on the front rank of the mainframe on
the left hand side.
6