Copying A (New) Dgt Pi Software Image Onto The Sd Card (Mac Os X) - DGT Pi User Manual

Note: Do not touch the metal contacts of the SD card after removing it from the slot!
4. If required for your computer, insert the SD card into the Micro SD adapter (included) and
place the adapter into a free SD slot of your computer.
5. Check via ''my computer'' which drive letter the SD card was assigned to. You can also easily
see the drive letter (for example G) within the left column of your Windows Explorer.
6. If not already installed on your computer, download the Win32DiskImager utility from:
https://sourceforge.net/projects/win32diskimager/
7. Extract and install the Win32DiskImager executable from the downloaded zip file.
8. Download the latest DGT Pi image file from our website at the DGT software section / DGT
Chess computers.
9. Extract this .zip file. The DGT Pi image file should end with .img after extraction.
10. Run the Win32DiskImager utility. Note: You may need to run the utility as Administrator on
your PC.
11. Select the "DGT Pi-x.xx.img" image file you extracted earlier.
12. Select the drive letter of the SD card in the device box. Be careful to select the correct drive.
If you select the wrong drive letter, you may destroy your hard disk content!
13. Click "Write" and wait for the write process to finish.
14. Exit the imager program, eject the SD card and take the SD card out of the adapter.
15. Place the SD card gently back into your DGT Pi and power up the device.
16. Be aware that due to implemented software improvements and added features after this
update, the behaviour of your DGT Pi may have changed.

Copying a (new) DGT Pi software image onto the SD Card (Mac OS X)

1. Shut down and disconnect DGT Pi from the power by unplugging the USB power cable.
2. Place DGT Pi upside down and remove the SD card as described in above section point 2.
3. If required for your computer, insert the SD card into the Micro SD adapter (included) and
place it in a free SD slot of your computer.
19