Table of Contents
Advertisement
13.2 Intercom Reconnection
If your intercom friend goes out of range while
having an intercom conversation, you may hear
static noise and eventually the intercom will be
disconnected. In this case, the headset
automatically tries to reconnect the intercom
every 8 seconds and you will hear high tone
double beeps until the intercom is
reestablished. If you do not want to make a
reconnection, tap the Center Button to stop the
attempt.
13.3 Factory Reset
If you want to restore the headset to factory
default settings, use the Factory Reset in the
configuration menu. The headset automatically
restores the default settings and turns off.
13.4 Fault Reset
When the headset is not working properly or is
in faulty status for any reason, you may reset
by pushing the pin-hole reset button below the
(+) Button. Insert a paper clip into the reset
pin-hole and press the reset button for a
second with light pressure. The headset will be
switched off. Restart the system and try again.
This will not restore the headset to factory
default settings.
Fault Reset Button
35
Hide quick links:
Advertisement
Table of Contents
