Sena DWO6-PRO User Manual page 29

11.2.5 VOX Intercom (Default: Disable)
If this feature is enabled, you can initiate an
intercom conversation with the last connected
intercom friend by voice. When you want to
start intercom, say a word such as "Hello"
loudly or blow air into the microphone. If you
start an intercom conversation by voice, the
intercom terminates automatically when you
and your intercom friend remain silent for 20
seconds. However, if you manually start an
intercom conversation by tapping the Center
Button, you have to terminate the intercom
conversation manually. However, if you start
intercom by voice and end it manually by
tapping the Center Button, you will not be able
to start intercom by voice temporarily. In this
case, you have to tap the Center Button to
restart the intercom. This is to prevent repeated
unintentional intercom connections by strong
wind noise. After rebooting the headset, you
can start intercom by voice again.
11.2.6 HD Voice (Default: Disable)
HD Voice allows you to communicate in
high-definition during phone calls. This feature
increases the quality so that the audio will be
crisp and clear during phone call
conversations. If this feature is enabled,
incoming phone calls will interrupt intercom
conversations and audio from the SR10 will not
be heard during intercom conversations.
Three-Way Conference Phone Call with
Intercom Participant will not be available if HD
Voice is enabled.
Note:
1. Refer to the manufacturer of your Bluetooth
device that will be connected to the
headset to see if it supports HD Voice.
2. HD Voice is active only when Audio
Multitasking is disabled.
29