Advertisement
Note: In this example, Hybrid Stacking is chosen.
The Stack Topology displays whether the topology of the stack is chain or ring. In this
example, the topology is Chain.
The Stack Master displays the unit ID of the master unit of the stack. In this example, the
switch being configured (Unit 1) is the master of the stack.
Step 3. Click at least two ports to configure as stacking ports. Include the port that is
connected to the other switch.
Note: In this example, XG3 and XG4 are chosen.
Step 4. Choose a unit ID from the drop-down list or choose Auto to have the unit ID be
assigned by the system.
Note: In this example, 1 is chosen.
The Unit x Stack Connection Speed displays the speed of the stack connection.
Step 5. Click Apply and Reboot.
Advertisement
