Caring For Your Wing - Ozone Spark 2 Pilot's Manual

CARE AND MAINTENANCE
Packing
To prolong the life of your wing and to keep the plastic reinforcements in the best possible condition it is very important to pack the wing
carefully.
Ozone recommends to use the concertina packing method exactly as shown so that all of the cells rest alongside each other and the
plastic reinforcements are not unnecessarily bent. You can however use the traditional half and half method. Using an Ozone Saucisse or
Saucisse light pack will help preserve the life of the wing and aid with the speed and ease of packing.
Step 1. Lay mushroomed wing
on the ground. It is best to start
from the mushroomed position
as this reduces the dragging
of the leading edge across the
ground.
Step 3. Lay wing on its side and Strap
LE...Note the glider is NOT folded
in half; it is folded with a complete
concertina from tip to tip. It is really
important to not stress the middle cell or
bend the plastic too tightly.
Step 2. Group LE reinforcements
with the A tabs aligned, make
sure the plastic reinforcements
lay side by side.
EN
17