Ec Declaration Of Comformity - Eaton ET5050 Operator's Manual

Accessories
Figure 75
Die installation tool (Part number: ET5040C-0004)
Die installation tool provides quick die change out capability
for all standard style dies. (See figure 75)
Manufacturer:
UNIFLEX-Hydraulik GmbH Robert-Bosch-Strasse 50-52 D-61184 Karben Germany
Phone: +49 (0) 60 39 / 91 71 - 0 Fax: +49 (0) 60 39 / 91 71 - 181
EC Declaration of Conformity
In accordance with EC Machinery Directive 2006/42/EC.
The following machine
HM 3xx Control C.2 PFC
was developed, designed and manufactured in compliance with EC Directive 2006/42/EC, in the sole responsibility of
UNIFLEX-Hydraulik GmbH Robert-Bosch-Strasse 50 - 52 D-61184 Karben
The following standards, codes and specifications have been ap-plied:
• EC Directive 2006/42/EC
• EMC Directive 2014/30/EC
• EN ISO 12100: 2010
• EN 60204: 2006
This declaration are invalid when the machine is modified or if un-authorized and unapproved third-party components are
used with-out our prior approval.
Entity authorised for documentation: Uniflex-Hydraulik GmbH, Technical Documentation Dept.
Karben, 24.03.2016
Figure 76
Replacement oil filter (Part number: ET5050C-0021)
Managing Director Harald von Waitz
EATON ET5050 Crimp machine operator´s manual E-EQCR-TT003-E2 May 2019 37