Download Print this page
Industrial Test Systems eXact iDip Quick Start Manual

Industrial Test Systems eXact iDip Quick Start Manual

Ph test procedure
Hide thumbs Also See for eXact iDip:

Advertisement

Quick Links

PH TEST PROCEDURE
The pH test procedure utilizes the STANDARD STRIP METHOD using the eXact iDip
tips on achieving best accuracy, and additional information regarding features of the eXact iDip
the eXact iDip
sensafe.com/idip.
YOU WILL NEED
• eXact iDip
• Your smartphone/tablet with the eXact iDip
• (1) eXact
• Water sample for rinsing and testing
SELECT CUSTOMER
a. Select 'Customers' from the Home screen.
b. Choose customer from list
OR Tap
'Add customer from
contacts' and choose
customer from your contacts list
OR Tap '+' to create a new customer
Android users: If no address is found, tap "No
addresses found"
c. Verify customer has been selected
Note:
In order to take full advantage of the GPS and Data Storage
features, each test result must be linked to a contact. Individual users
may select their own contact listing.
a
b
POWER ON EXACT IDIP
Press the
button to power on the eXact iDip
photometer.
SELECT BLUETOOTH TEST
Tap the menu slide out ' ' and select 'Bluetooth Test' from
the choices shown.
CONNECT EXACT IDIP
The eXact iDip
app will automatically connect to the most
®
recently used eXact iDip
photometer. If not, select your
®
eXact iDip
from the bottom of the screen.
®
Note
: Ensure you always connect your eXact iDip
the Bluetooth
connection within the app. If you experience an issue
®
connecting your device, check to ensure that your smartphone/tablet's
Bluetooth
®
function is turned on and your device is compatible.
Date/Time Sync Successful
Check LCD display for Bluetooth icon.
app, please refer to the eXact iDip
®
photometer
®
Strip Micro pH (Part no. 486639-II)
®
c
®
®
®
photometer via
®
©2015, Industrial Test Systems, Inc. Printed in USA
Quick Start Guide. You can download a copy on our website at
®
app installed
®
SELECT TEST
SELECT
'
Tap
Test' at the top and select pH PH. The eXact
iDip
photometer and eXact iDip
®
selection for pH.
FILL CELL
Rinse the cell 3 times with the water sample to be tested,
FILL
then
cell to capacity to begin test.
CAP CELL AND ZERO METER
Place the Cell Cover onto the CELL and press
eXact iDip
photometer display reads 0
®
is ready for testing.
Smart Photometer System
. For
®
®
photometer and
®
app will both display the test
®
pH PH
Bluetooth Test
pH PH Selected
indicating the meter
PPM
1
and the

Advertisement

loading

Summary of Contents for Industrial Test Systems eXact iDip

  • Page 1 The pH test procedure utilizes the STANDARD STRIP METHOD using the eXact iDip Smart Photometer System . For ® ® tips on achieving best accuracy, and additional information regarding features of the eXact iDip photometer and ® the eXact iDip app, please refer to the eXact iDip Quick Start Guide.
  • Page 2 Save, send, and share results instantly using the eXact iDip ® app. For step-by-step instructions, refer to the eXact iDip Quick ® Start Guide. You can download a pdf copy on-line at sensafe.com/idip. eXact iDip ©2015, Industrial Test Systems, Inc. Printed in USA...