Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Industrial Test Systems eXact LEADQuick
Summary of Contents for Industrial Test Systems eXact LEADQuick
- Page 1 Smart Photometer System ®...
- Page 2 Contents eXact LEADQuick with Bluetooth SMART Photometer Overview ® ® About your eXact LEADQuick photometer ® eXact LEADQuick Meter Messages ® About Bluetooth SMART ® About the Sample Cell (built–in 4mL) How to install or replace “AAA” batteries 2–Year Limited Warranty Lead in Water Recommendation for “First Draw Sample”...
- Page 3 eXact LEADQuick with Bluetooth SMART Photometer Overview ® ® Appears when meter is connected with SAMPLE CELL eXact iDip app. ® Built–in plastic 4mL cell for collecting your RESULT water sample IN abs SCREEN RESULT RESULT BATTERY IN µg/L in mg/L READ BUTTON Starts test timer ON/ZERO BUTTON...
-
Page 4: About Bluetooth
About your eXact LEADQuick photometer ® In order to save power, the meter is designed to turn off after 5 minutes (timed from the last button pressed). Should the meter turn off in the middle of a test, the last stored zero in the meter will remain valid when the meter is turned on again. -
Page 5: Year Limited Warranty
About the Sample Cell (built–in 4mL) The built–in Sample Cell (CELL) is transparent plastic and, when filled to the top, contains 4mL. The sturdy CELL design will last for over 20,000 readings. Scratches on the CELL will not interfere or compromise the accuracy of the readings because of its fixed position. - Page 6 Lead in Water Recommendation for “First Draw Sample” The EPA 2007 Lead and Copper Rule Revision has a heavy lead testing focus on schools. The sampling is tiered: 1. “First draw sample” - sample a line unused for at least 8 to 18 hours. Draw the first 250mL to test. This measures the lead contribution from fixtures.
-
Page 7: Exact Idip ® App Overview
eXact iDip app overview ® GET IT ON MENU: HOME SCREEN Opens slide-out for easy access to all app features ® HISTORY: Accesses saved results which can be sorted, edited, CALENDAR: and emailed. Displays your Also accesses schedule/ History Map appointments CUSTOMERS: STORE:... -
Page 8: Download The App
eXact iDip app overview ® Download the App Using your smart device, download the eXact iDip app. To see if your smart device is compatible, please ® see our compatibility list at sensafe.com/compatible-devices/. We are constantly improving the eXact iDip app and welcome your suggestions to help make our ®... - Page 9 LEADQuick photometer and app. Please note that batch uploading tests saved on your eXact LEADQuick to a smartphone/tablet is not yet available. If you want to save a test result from your LEADQuick to the app, you will need to run the test while connected to the...
- Page 10 Managing data with the eXact iDip app ® After you have run your test, you can save, send, and share your results, by following the steps below. MANAGING DATA (SAVE/SEND/SHARE) When all tests have been performed, select ‘Results’ at the bottom of the screen. To add notes tap the desired test result.
- Page 11 Total Lead in Water Test Procedure Uses Reagent Set Part Number 486901 PREPARE SAMPLE FOR TESTING Collect water sample in 50mL conical tube to the 50mL line. Add five (5) drops of ACID-1 Reagent, Part #486999. Mix and allow to sit for at least five (5) minutes. After this time, TEST SAMPLE is ready for testing.
- Page 12 Mercury in Water Test Procedure Uses Reagent Set Part Number 486901 PREPARE SAMPLE FOR TESTING Collect water sample in 50mL conical tube to the 50mL line. Add five (5) drops of ACID-1 Reagent, Part #486999. Mix and allow to sit for at least five (5) minutes. After this time, TEST SAMPLE is ready for testing.
- Page 13 Cadmium in Water Test Procedure Uses Reagent Set Part Number 486904 PREPARE SAMPLE FOR TESTING Collect water sample in 50mL conical tube to the 50mL line. Add five (5) drops of HCl-1 Reagent, Part #486994. Mix and allow to sit for at least five (5) minutes. After this time, TEST SAMPLE is ready for testing.
- Page 14 Spiked Recovery Test Method For Interferences The Spiked Recovery Test Method (also referred to as Standard Additions Method) is used to verify that LEADQuick gives accurate results for your water sample. If you find an unexplained difference in results ™ when compared to another test method it is reasonable that you should resolve the issue.
- Page 15 Lead in Soil Test Procedure Extraction Method (Pb-1P, 0.1mL scoop, and 50mL Plastic Conical tube are not supplied, but required to perform this test) Add one level scoop (0.1mL volume scoop, which holds approximately 0.14 grams) of soil sample to a clean 50mL, graduated, plastic conical tube. Add Twenty (20) drops of Pb-1P, Part No. 487925-P15 to the conical tube.
- Page 16 Lead Recovery in Various Water Samples: Our laboratory has performed numerous Spiked Recovery tests using water samples from around the world. The water samples were obtained in the locations as identified below. The water was collected in clean plastic bottles and shipped to our lab. The samples were not preserved by acid and not refrigerated.
- Page 17 Summary of LEADQuick Chemistry for Lead (Pb ) Detection: ™ Lead in the water sample is first solubilized to Pb by the addition of the Nitric Acid reagent. Pb-2 Buffer is then added to make the solution alkali. The eXact Strip Pb-3 is dipped for 20 ®...
-
Page 18: Kit Specifications
Table 1: Lead Test (PB MENU) Interferences (Similar interferences can be expected for Mercury and Cadmium Tests.) Interference Level Ion Interference Level Aluminum, Al 2 mg/L Magnesium, Mg 200 mg/L Barium, Ba 3 mg/L Manganese, Mn 0.5 mg/L Bromide, Br 20 mg/L Mercury, Hg 0.01 mg/L... -
Page 19: Tips For Best Accuracy
Tips for Best Accuracy Become familiar with the meter and the different tests by reading the instructions carefully. Observe the dip time (as required for the test) for accurate results. Be sure the CELL is filled to capacity. Then, tilt meter forward to discard about 0.2mL of the cell volume. -
Page 20: Available Reagents / Reorder Information
Visit us online: for up–to–date product information. ITSSENSAFE SENSAFE MANUFACTURED BY DISTRIBUTED BY Industrial Test Systems, Inc. ITS EUROPE, LTD 1875 Langston Street The UK Centre for Homeland Security Rock Hill, SC 29730 Building 7, Chilmark 1–800–861–9712—Inside the U.S.A.
Need help?
Do you have a question about the eXact LEADQuick and is the answer not in the manual?
Questions and answers