5.3 Installation
A6V10374021_f_en_--
Notes on work on electrical installations
CAUTION
Electrical voltage on lines
Risk of injury due to electric shock
●
During mounting and installation work, electrical voltage must not be applied
to the lines.
WARNING
Deactivating the manual call points prevents alarms from being forwarded.
Alarming does not take place.
●
Mark deactivated manual call points or those which are not fully functional
with the notice 'NOT IN USE'!
●
Do not remove the 'NOT IN USE' notice until commissioning is about to begin.
Figure 7: 'NOT IN USE' label
Note the positive and negative poles.
Only connect one wire per terminal. This is the only way to ensure the connection
is failure-free for the entire service life of the device.
Mounting/Installation
5
Installation
23 | 38