Table of Contents
Advertisement
3 Hardware Installation
3.1
Power-up NIO200HAG
If the power connects correctly, then the "Power LED" will lit accordingly.
3.2
Connect Wi-Fi Antennas
NIO200 HAG User Guide
- Prepare DC power source ( 12~48
VDC ) or standard PoE facility such
PoE swtich or PoE injector.
- If use external DC power source,
please carefully check if the polarity
of power cord fits the polarity
drawing in this diagram.
- When use PoE power source, just
plug in the Ethernet cable
Page 8 of 120
Advertisement
Table of Contents
