Operating Instructions
Connecting EVK3030 to PC via J3
1. Connect J1 or J2 on EVK3030 to scan engine supporting TTL-232 port.
2. Connect J3 on EVK3030 to the serial port on PC with RS-232 cable (CBL037R).
3. Plug the power adapter (KSAS0120500150D5) into the power connector on the RS-232 cable.
4. Plug the power adapter into AC outlet.
5. When EVK3030 is electrified, its buzzer will beep, which means EVK3030 is in working state.
6. Press the trigger and start to read barcodes.
Connecting EVK3030 to PC via J4
1. Connect J2 on EVK3030 to scan engine supporting USB port.
2. Connect J4 on EVK3030 to the USB port on PC with USB cable (FM300U).
3. When using USB HID-KBW, no driver is required; when using USB COM Port Emulation, install the
corresponding driver (UFCOM driver) on PC.
4. When EVK3030 is electrified, its buzzer will beep, which means EVK3030 is in working state.
5. Press the trigger and start to read barcodes.
Connecting EVK3030 to PC via J5
1. Install CP210x driver on PC.
2. Connect J1 or J2 on EVK3030 to scan engine supporting TTL-232 port.
3. Connect J5 on EVK3030 to the USB port on PC.
4. When EVK3030 is electrified, its buzzer will beep, which means EVK3030 is in working state.
5. Press the trigger and start to read barcodes.
12